Water Removal Methods Used in Lakeland After a Storm
Team SERVPRO Arrives With the Trained Personnel and Equipment to Dry Out Your Home After Flooding
After parts of Lakeland suffer a severe thunderstorm, moisture problems inside buildings can exist. Storms can cause a home to receive water damage in multiple ways. Water can flow into a house from broken windows, worn door and window seals, or holes in the exterior caused by the storm.
If the rainwater coming in from outside has a high contamination level then most porous building materials such as carpet get removed and replaced. In Lakeland, water removal after a storm requires a variety of methods and equipment to mitigate. After materials that cannot be saved are removed, then the remainder of the moisture gets extracted using specialized industrial extraction equipment.
Extractors are built to clean carpet and upholstery as well as to extract moisture. Most extractors have a heater, pump, and vacuum system. When cleaning carpets, the heater, pump and vacuum all get used. During extraction due to water damage, only the vacuum gets implemented.
Our SERVPRO technicians can use either a portable or truck mounted extractor to remove water. Portable extractors can be brought into a structure and are suitable for getting into restricted areas. Truck-mounted extractors do all the same things that portable ones do but are more powerful. Truck-mounted systems have their own power source and get used for both extraction and restorative carpet and upholstery cleaning.
Depending on the type of extractor, portable units have both a solution and waste tank that can each hold five to twelve gallons of water. Portable units typically weigh between 40 and 90 pounds. At 60 degrees Fahrenheit at sea level most portable units have a 140 inches of water lift. These extractors can heat water to temperatures between 180 and 212 degrees Fahrenheit.
Truck-mounted extractors have much larger tanks and can hold 60 to over 100 gallons of water. These systems weigh between 500 and 1,000 pounds. The vacuum power of a truck-mounted system is higher with sea level vacuum lift capabilities of 185.71 to 198.98 inches of water lift. These extractors can heat water to temperatures ranging between 180 and 220 degrees Fahrenheit.
Extraction is the first method used during the mitigation process. After the water gets removed with the extraction systems, drying then takes place. For help with unwanted moisture after a storm call SERVPRO of Bartow / Lakeland Highlands at (863) 510-5962 24 hours a day, seven days a week.
Click here for more information on the city of Lakeland.